Unfortunately not as many of our suppliers require us to order chain in bulk, but if you are looking to place a bulk order, contact us and we can see if it is viable.

Very close – its hard to exactly match the actual colour from a photo due to light conditions, and variences in batches from manufacturer, etc. In order to get an accurate idea, contact us for a sample of our chains.

It depends on the chain colour/type

• White (200M)
• Satin Nickel, Grey Nickel, Antique Brass, Matte White, Matte Black (150M)
• Bronze, Copper, Acid Brass, Raw Brass (125M)

Use a continuous chain if:

• Your Blind has a Pullaway Drive Cog
• You have a child retainer in place

These would meet your child safety requirements and will work on most blind drives.

A breaker chain is a child safety device built onto the chain. You do not require a drive with a pullaway cog or a child safety retainer fitted.  However, your drive needs to be of a 1:1 ratio as the breaker will not do a full rotation around the drive cog.

For Guidelines only:

If you have a standard drive (e.g. the cog does not pull out of the drive for child safety) then:

1. Measure up 1500mm from the floor. This is the base of your drop.
2. From the drop base, measure up to the top of your window. This is your required drop.

If you have a pullaway drive (the cog pulls out when force is applied to a chain)

1. Measure up 600mm from the floor. This is the base of your drop.
2. From the drop base, measure up to the top of your window. This is your required drop.

It would not be possible on single orders but if you wish to order rolls in bulk, email us at orders@tulipblinds.com with your requirements and we can see what we can do.