The finishing touch.
Ten chain finishes, made up to your blind drop as ready-to-fit continuous loop or breaker chains. Or buy by the roll and make your own.




Eight classic finishes and two premium metals. Pick one to see it.

Satin Nickel
Premium metal
Roll length: 150m
Classic finishes
Premium metal
Match your chain to your handles, taps or light fittings. Not sure which to choose? Ask us for free chain samples.
Most chain is made up for you as a ready-to-fit continuous loop or breaker chain. Blind makers can buy by the roll.
Ready-to-fit continuous loop or breaker chains, made to your chain drop. This is how most chain is ordered.
1m of chain gives a 0.5m drop. Would you rather have a single length? Just ask when you order.
Full rolls for blind makers. Make up your own loops, and save time and money.
Pre-made white plastic loops in standard drops. We don't make custom white plastic loops, so choose the nearest drop.
Looking for a bulk order? Some chain has to be ordered in bulk from our suppliers, so contact us and we’ll see if it’s viable.
Both come ready to fit, made to your chain drop. The right one depends on your drive.
One unbroken loop, ready to fit. For child safety, fit it with a chain retainer, or use it with a PullAway drive.
A loop with a chain breaker that pulls apart under pressure. A simple child safety measure.
The control unit (drive) on your blind decides which chain you need, and whether you need a chain retainer. Choose yours below.
Your control unit (drive)
Ratio
A standard drive's cog stays in place. A PullAway drive's cog pulls out when force is applied to the chain.
1:1 standard drive
Tick: suitableDash: not suitable or not needed
For guidance only. If you’re not sure which drive your blind has, contact us.
A chain retainer holds the loop tight to the wall or frame, so it can’t form a hazard. Choose screw-on clips, or adhesive clips with no drilling.
A strong, simple fixing for most walls and frames. Screw the clip in place and slot the chain in.
No screws needed. Apply the adhesive pad to the clip, remove the protective layer, and press it onto a clean, smooth surface.
Not suitable for painted, textured, rough or porous surfaces.
For blind makers who buy chain by the roll. Make up continuous loop chains in your own workshop, and save time and money.
A specialist plier for joining and cutting 4.5mm metal ball chain, made in England.
Quality chain and components, made for years of use.
Breaker chains, retainers and advice to help your blinds comply.
Made up by us, with support and spares whenever you need them.
Help before you order, from people who know blinds.
Order chain online with your trade account, or talk to our team.
Log in, choose Create New, then select Chains. New to Tulip? Apply for a trade account.
Call, email or chat live with our team. Ask us for free chain samples too.
Most chain is ordered as a ready-to-fit continuous loop or breaker chain, made to your chain drop. A loop hangs down on both sides, so 1m of chain gives a 0.5m drop. Prefer a single length? Just ask when you order.
We don’t make custom white plastic loops. Choose the nearest pre-made drop: 500mm, 750mm, 1000mm, 1250mm, 1500mm, 2000mm, 2500mm or 3000mm. White plastic chain is also available in 200m rolls.
A continuous loop chain is one unbroken loop, ready to fit. A breaker chain has a connector that pulls apart under pressure, as a child safety measure.
No. A 1:4 drive is geared, so the breaker can’t go around the drive cog to do a full lift. Use a continuous loop chain with a chain retainer instead.
No. The PullAway cog releases when force is applied to the chain, which acts as the child safety measure. So you don’t need a breaker chain or chain retainer for compliance.
Screw-on P-clips and D-clips suit most surfaces. EasyCleat adhesive P-clips and D-clips need no drilling, and suit smooth surfaces like PVC and smooth tiles. They aren’t suitable for painted or textured surfaces.
White plastic comes in 200m rolls. Satin Nickel, Grey Nickel, Black Nickel, Raw Brass, Antique Brass, Matte Black Metal and Matte White Metal come in 150m rolls. Bronze and Copper come in 125m rolls.
We sell chain by the roll, or made up to your blind drop. Looking for a bulk order? Contact us and we’ll see if it’s viable.
Yes. Contact us for advice, or to request free chain samples.
Yes. The Maun Ball Chain Plier No. 10 joins, re-joins and cuts metal ball chain, so you can make up continuous loops from full rolls in your own workshop.